DEPARTMENT OF TRACE ELEMENT ANALYSIS

This powerful and flexible multi-element analyzer is the new 2nd generation 8900 ICP-QQQ. It offers a range of configurations to cover applications from routine contract analysis to advanced research and high performance materials analysis. The Agilent 8900 ICP-QQQ adds MS/MS mode for controlled and consistent interference removal in reaction mode with hydrogen, helium, oxygen and ammonia.

Complete setup to perform ultratrace element analysis including speciation analysis. ICP-MS is the core of this setup. This top level ICP-MS 7700x instrument provides robust plasma and is equipped with ISIS hydride generation system, ASX-500 series autosampler, high matrix introduction interface to cope with samples having complicated matrix without liquid sample dilution, octopole collision/reaction cell to remove isobaric interference and discrete dynode electron multiplier detector to reach high linear range. HPLC (Agilent 1200 Series isocratic pump with manual injector) and GC (Agilent 7890A Series GC system) enable to perform speciation analysis of analytically important metals.

HPLC system to separate, identify and quantify compounds in a mixture. A pressure range of up to 400 bar with a flow rate up to 5 mL/min allows the use of almost any column. The separations are carried out on RP or IE columns. The LC is equipped with 1260 Infinity II VW Detector, standard flow cell and thermostated autosampler and column compartment.

Gas chromatograph equipped with ICP-MS interface and FID detector.

The contrAA® atomic absorption spectrometers are the first and only commercially available instruments for high-resolution-continuous source AAS. Just one light source for all elements (Xe short-arc lamp) is used in combination with a high-resolution echelle monochromator and CCD detector. ContrAA® 300 is the atomic absorption spectrometer for flame and hydride generation technique. It is equipped with an autosampler, “segmented flow star SFS6 system” for small sample volume introduction and samples with strong matrix influence, batch and continuous flow hydride generation systems.

ContrAA® 600 is the atomic absorption spectrometer for electrothermal atomization technique. It contains a transversely heated graphite furnace, an autosampler and SSA 600 system for fully automatic solid sampling with integrated microbalance.

equipped with deuterium background and Smith-Hieftje corrections, with CBM unit for evaluation of chromatograms, with an in-house made hydride generator and electrical device (Perkin-Elmer furnace and Omega controler) for heating quartz atomizers.

equipped with deuterium background correction and integrated Super Lamp power supply, allows flame/hydride atomization mode, with an in-house made continuous flow or FI hydride generator and electrical devices for heating quartz atomizers.

equipped with deuterium background correction, with electrical device for heating quartz atomizers.

equipped with EDL II power source, deuterium background correction and integrated Super Lamp power supply, with a fully automated hydride generation system FIAS 400, with electrical device for heating quartz atomizers, graphite furnace and flame atomizer.

equipped with deuterium background correction, with a fully automated hydride generation system FIAS 400, with electrical device for heating quartz atomizers.

equipped with EDL I power source, deuterium background correction, A/D converter, PC for data evaluation, an in-house made devices to generate hydrides and volatile species of transition elements and electrical device for heating quartz atomizers.

Advanced Mercury Analyzer AMA 254 equipped with solid samples autosampler (ASS-254), Altec, Czech Republic.

Electrodeless discharge lamp is used as a source of radiation and a solar blind photomultiplier as a detector. It is also equipped with diffusion flame and with flame-in-gas shield (FIGS) atomizers for atomization of hydride forming elements.

Electrodeless discharge lamp is used as a source of radiation and a solar blind photomultiplier as a detector. It is also equipped with diffusion flame and with flame-in-gas shield (FIGS) atomizers for atomization of hydride forming elements.

High resolution gamma-ray spectrometry system Genie 2000 (Canberra); with high purity germanium detector (rel. efficiency 20%, FWHM for gamma line 1332 keV 60Co is 1,8 keV).

A microwave digestion system with a single reaction chamber technology in a fully automated benchtop package. UltraWAVE digests up to 15 samples – of any matrix – simultaneously.

An automated, closed, acid reflux system cleans thoroughly and safely laboratory's accessories for ultratrace analysis.

This unique subboiling system is employed to produce high-purity acids for use in trace analysis by acid distillation.

This FDM 3D printer has a 235x235x250mm print volume and the combination of a heated print bed (up to 110°C) and nozzle temperatures of up to 260°C allows it to print materials like PLA, PETG, ABS, PP, or even PVDF.

Centrifuge Frontier 5718R

laminar flow boxes FBB 120 and FBB 90

Heating and drying oven UF55 SingleDisplay

Lathe D 180x300 Vario, Product No.342 0301